Technical Grade Dioctyl Phthalate Plasticizer Hydrolysis Resistant Lightweight
Description
widely used as a plasticizer, good overall performance, and good compatibility with polyvinyl chloride, synthetic resins, cellulose nitrate and other rubber. is widely used in all kinds of soft PVC plastics such as films, leather, wire, cable, molded products and other; widely used in rubber, paints and emulsifier and other industries, can improve resilience of products, reduce the compression deformed, and no effect on the vulcanization of rubber.
Safety
Based on toxicity studies, it has a low order of toxicity and does not require special handling.
Handle in accordance with good industrial hygiene and safety practices. Avoid eye contact by wearing personal protective equipment. If eye contact occurs,wash with flowing water and contact physician.
Avoid repeated or prolonged skin contact. Avoid breathing vapors by providing adequate ventilation. Always refer to the Material Safety Data Sheet (MSDS) for detailed information on safety.
Specification
| Item |
Index |
|
|
| |
Unit |
Top grade |
Typical factory values |
| Color(pt-co) |
≤ |
30 |
30 |
| Ester content |
%≥ |
99.5 |
99.5 |
| Flash point |
℃≥ |
210 |
210 |
| Density(p20) |
g/cm3 |
0.957—0.965 |
0.957—0.965 |
| Acidity |
mgKOH/g≤ |
0.1 |
0.07 |
| moisture |
%≤ |
0.1 |
0.08 |
Stroage
Emergency overview - Avoid contact with skin, eyes and clothing - Avoid breathing vapor or mist - Washing thoroughly after handling - Use only with suitably ventilation - Avoid contact with strong oxidizers, excessive heat, sparks or open flame.
Hazardous decomposition products - Thermal decomposition may release toxic and hazardous gases Fire and explosion hazard - Slightly fire hazard when exposed to heat or flame and larger fires use water spray fog or regular foam.
Stability and reactivity - Stable under normal temperature and pressure.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value ,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other index ,requirement ,on thermal stability.
Product Tags:
|
|
Technical Grade Dioctyl Phthalate Plasticizer Hydrolysis Resistant Lightweight Images
|
